dark mode light mode Search
Search

How to Choose and Fit the Right Clutch for Your Car

How to Choose and Fit the Right Clutch for Your Car

When you’re considering new clutch kits for your car, there are several things to keep in mind. There are many things to be aware of, depending on the specific car you are working with, how you use it, and what you might need it to do in the future. 

Being knowledgeable and thinking through all the factors is the best way to ensure the car clutches you purchase are right for your needs. 

We’ll help by giving you insight into the right option for you based on the life expectancy and performance you want weighing against the cost of the clutch kits.

How Will the Car Be Used?

There are four major ways that a car can be used. It could be for personal use, street performance, work use, or on a racetrack. However, many people use their cars in various ways, so you want to keep that in mind.

Personal Use Vehicle

With a personal use car, you’re going to drive it most days as the manufacturer expects you to. In most cases, ease of use and maintenance costs are the most important factors for this car, and performance modifications are rarely needed.

The best value for car clutches in this car is an aftermarket model that can be purchased for less. Make sure it comes with premium items and has a good warranty. If you’ll be driving the car for a while, this is the best option.

If you might sell, going with less expensive clutch kits is fine. However, the installation can be more challenging so this might not be ideal in all cases. Clutch Direct offers many different clutches that may meet your needs.

Work Use Vehicle

In most cases, this will be a truck that hauls items around. Some may have modifications for better torque and horsepower. Upgraded clutch kits are ideal for this situation. Make sure any modifications are considered before choosing car clutches. 

There are various stages of car clutches to choose from. Going for the highest isn’t always the best option. Clutches should match the torque and use of the vehicle. For instance, putting in a stage 5 clutch on a non-modified truck will make it hard to use the clutch. Look at your options before choosing.

Street Performance Vehicle

Streetcars are often going to have modifications to consider. They might have rebuilt engines, modified chips and exhaust systems, nitrous systems installed, or lightened flywheels. Each of these affects the type of clutch kits to choose from. Make sure to check the manufacturer’s info about the parts’ effect on torque and horsepower to avoid going over spec with car clutches.

Stage 2 clutch kits are often good for cars used for daily driving and some performance. Going to higher stages works for situations where your vehicle is more highly modified. Contact the clutch supplier to be sure you make the right decision.

How to Choose and Fit the Right Clutch for Your Car

Racing Vehicle

When it comes to racing, there’s one main goal – winning a race. Cost is less important, and you’ll want to go with what works. Know your car, the engineering, and work with companies you can trust. Look for multi-plate clutch kits with high friction materials, and lightened alloys for the best results.

Fitting Car Clutches in Your Vehicle

A few items are needed to fit in clutch kits, such as the clutch, flywheel, lubricant, a jack, and a screwdriver. After you have those things ready, follow the steps below to fit the clutch. It’s easier than you think!

1. Securely Park Your Car

Park the car in a secure area and lift the front of it. Use a high-quality tool to bring the car up from ground level. You’ll need to use a lift to pull out the engine and transmission of the car, so you want this to be as stable as possible. Trying this without the appropriate equipment can be dangerous so wait until you can do things correctly. 

2. Work on the Transaxle

The next step is to get out the transaxle to access the clutch. The first step here is to unhook the cable from the car clutches and the positive battery cable. After that, remove the speedometer and electrical wires. Finally, disconnect the starter motor and move it out of the car.

3. Remove the Engine Mount

Find the bolts on the housing at the rear engine and remove them to take the transaxle away. Lower your floor jack to pull out the car transmission by raising the jack to support the car and take the transmission off the engine.

Next, remove the drive axle followed by the prop shaft. You’ll also need to take off the pressure plate and slide the clutch disk out to get to the area you need. Replacing or repairing the flywheel and removing debris from the crankshaft can also be done at this point.

4. Replace with Clutch Kits

Make sure all the components visible are clear of dirt, grease, and oil before you replace car clutches. Replace the flywheel and then replace the clutch with the new one. Put in a new clutch disk and align it using the proper tool. Once the disk is in place, use the pressure plate and bolts to secure it all, and then put the transaxle back in.

5. Connect the Transaxle

First, assemble the release bearing with the release lever and lubricated pivot points. You want to make sure the transaxle is in the spline hole in the proper place so it glides. Take your time and try a few times until the process is perfect. Next, replace the bolts and tighten them up. You can also reattach all wires, pipes, and linkages.

6. Finish the Process

Once you’ve done all this, release your jack. Hold the transmission as the car moves back to its original spot. Connect the battery, top off the clutch fluid, and reconnect anything else left. 

After you finish adding clutch kits, head out and give your car a spin to see how new clutch kits can make a huge difference. Make sure everything is working properly and you’ll be finished!

Image courtesy of (c)Steshenko Dmitry