dark mode light mode Search

Simple Tricks on Repairing Cracked Concrete

Simple Tricks on Repairing Cracked Concrete

Concrete is one of the most popular and beautiful materials used when constructing. Besides, their beauty has other great qualities that make them preferable. Low maintenance, eco-friendly design options, hypoallergenic when coated with epoxy, durability, and long-lasting qualities define concrete material. Other factors can cause concrete to erode, crack or discolor. Weather conditions, simple wear, and ground shifts are factors that lead to wear and tear of concrete surfaces. 

Many peoples rush to replace damaged concrete or resurface it without seeking expert opinions. They think I’ll just get the Rustoleum Epoxy shield kit and renovate my floor. Concrete resurfacing is an essential factor to help revitalize concrete. It will help save a lot on your finances and give your concrete a new look and extend its life if you let an expert do the job. 

What are the advantages of concrete resurfacing?

Many people might be oblivious to the importance of concrete resurfacing. And rush to replace old concrete without seeking an alternative. Here are few conditions that concrete resurfacing help revitalize: 

  • It helps cover unattractive concrete
  • It helps with concrete discoloration
  • Update old finishes with the latest designs
  • Repair concrete cracks
  • Help with concealing concrete surface imperfections

 Simple Tricks on Repairing Cracked Concrete

7 Quick Steps on Fixing Concrete Cracks

Cleaning the area and surface leveling is essential for preparing your concrete floor for carpeting or tile placement. Shifting of the ground in most instances causes concrete to crack. And it’s significant to fix the broken concrete before you continue with the concrete surfacing project. Here are a few basics steps that will help you with fixing concrete cracks:

  • Identify the damaged area: Identify where the crack is and position a chisel at the edges of the crack. For the best outcome, make sure the chisel is at a 45-degree angle.
  • Undercut the damaged areas: To drive the chisel’s tip into the concrete, hit the chisel’s top with a sledgehammer. Undercutting will give the best results on the concrete surfaces. Make sure under the concrete you’re able to cut an upside-down V-shape. Repeat this process on all the damaged areas. 
  • Clean the area: It is essential to sweep any left debris from the damaged area. And vacuum all the dust before fixing the area. 
  • Prepare the mixture: Pour a small amount of Rustoleum Epoxy Shield in a disposable container. It would be best if you apply the adhesive to the concrete using an old paintbrush. 
  • Mix the ingredients: In a bucket, mix water with a dry vinyl concrete patch using a trowel. For the mixture to be effective, make sure it has a thick consistency like cake batter. 
  • Concrete application: Pour the vinyl concrete mixture into the damaged concrete surface. It will help if you use a trowel to patch the material inside the cracks. 
  • Level the surface: To achieve an appealing look, use a trowel to smooth the top of the newly fixed area. To blend and level the repaired area’s surface edges, feather the patch material out and away from the crack. 
  • Cure and Seal: Curing and sealing is the final step in concrete resurfacing. The fixed area needs to cure for durability purposes. After the concrete surface is well cured, it would be best to apply a sealer for the best results. A sealer is essential as it helps reserve your concrete surface’s look and enhances the surface’s beauty and stain resistance. Above all, sealed concrete surfaces are easier to maintain. 

Damaged concrete is unattractive and unsafe. It is essential to repair any cracks found in your home, garage, entryway, etc. You will be enhancing your home’s visual appeal and ensuring that there’s safety in your surroundings. The steps above are essential when it comes to concrete resurfacing.