Are you experiencing low water pressure in your kitchen faucet? If so, then it is time for your faucet to get some cleaning! The water flow is usually obstructed when gunk and calcium build-up clogs the faucet head. Subsequently, it affects the water flow and may hamper your progress while working in the kitchen.
Do you know that some companies offer kitchen faucets with a soap dispenser? Getting both crucial parts of the kitchen together will make your life much easier.
If you have little knowledge of this kind of product, you must visit https://www.simully.com/best-kitchen-faucets-with-soap-dispenser/. It will provide you an in-depth analysis of top kitchen faucets with soap dispensers, so do check it out!
Your kitchen faucet enables you to wash dishes and use water for cooking and cleaning. The underside of the kitchen faucet may go unnoticed, but it is a breeding ground for mildew, lime build-up, and mold if not cleaned regularly. It should be cleaned at least once in a couple of weeks.
If you are unaware of the right way to clean your faucet head, you are just in the right place! We will walk you through different methods of cleaning a kitchen faucet head, helping you maintain it properly. So, keep on reading to learn more about it.
Materials Required To Clean A Faucet Head
You would require some supplies to get all the gunk and calcium out of your faucet head. Here is what you need:
- White vinegar
- Ziploc storage bag
- Rubber band
- Baking soda
- Dish soap
How To Clean A Kitchen Faucet Head?
Below we have highlighted various ways in which you can clean your kitchen faucet head. Let’s have a look at them:
Cleaning A Kitchen Faucet Head With Vinegar
Using white vinegar to clean your faucet is one of the most common methods used. It helps in cleaning the calcium and mineral deposits. It is a simple method and does not require you to remove the faucet head. Here is how you can perform it:
- Take a baggie and fill it up with a cup or two of white vinegar. The vinegar in the baggie should be enough to submerge the faucet head completely.
- Next, pull the baggie over the faucet head and tie it with a rubber band to keep it in place.
- Let it sit for a couple of hours or overnight.
- Remove the baggy and discard it.
- Apply some baking soda on a toothbrush and scrub off any leftover gunk.
- Finally, rinse with warm water, and you are good to go!
Cleaning A Faucet Head With Lemon
Can’t stand the smell of vinegar in your kitchen? No problem! Use lemon, instead, for cleaning calcium and mineral deposits in your faucet head. Lemon is also a natural acid that works pretty well when it comes to removing dirt.
- Cut a lemon half and make an indent in the center with your thumb or a butter knife.
- Now, twist the piece of lemon onto the faucet.
- Put a bag over the area and tie it with a rubber band to secure it.
- Leave the piece of lemon on the faucet for a couple of hours or overnight.
- Then, remove the lemon slice and discard it.
- Put some baking soda on a toothbrush and scrub any leftover dirt.
- Rinse the baking soda and lemon juice with warm water.
Use Baking Soda To Clean A Faucet Head
You can also try a mixture of baking soda and vinegar to clean the faucet head. To execute this method:
- Make a mixture of two parts baking soda and one part white vinegar in a baggie.
- Let it fizz for a while, then place the mixture over the faucet head and secure it with a rubber band.
- Let the faucet soak for around 20-30 minutes.
- Next, use dish soap and baking soda to make a paste for removing limescale and calcium deposits.
- Put the paste on the toothbrush to scrub limescale and calcium.
- Lastly, rinse with warm water.
Using CLR To Clean A Faucet Head
If vinegar is not producing the desired results to clean your faucet head, it is probably due to the presence of hard water and plenty of grime. To address the issue, you must use one of the best limescale removers, CLR.
- Pour CLR into the baggie and pull it over the faucet.
- Let the faucet soak for around 5-10 minutes.
- Next, take off the bag and scrub any remaining gunk with a toothbrush.
Be sure to wear gloves when pouring CLR into the baggie and remove the faucet bag to prevent the chemical from harming your skin.
How To Remove A Faucet Head?
Sometimes cleaning the faucet head with an acidic cleaner to get rid of calcium and mineral deposits may not be enough. The blockage in the faucet may require you to remove the faucet head to clean it thoroughly. To do so, you must know how to remove the faucet head. Here is how:
- Place a towel on the edge of the faucet to prevent scratching the surface.
- Take pliers to loosen the end and as it is loosened, remove the rest of the part with your fingers.
- Rinse away all the gunk you can see with water.
- Pour white vinegar into a bowl and soak the end for around an hour.
- Lastly, put baking soda on a toothbrush to scrub any extra gunk away. Use a needle or toothpick to erase dirt on the holes of the faucet head.
The Bottom Line
Cleaning the faucet head is essential for the smooth execution of tasks in the kitchen. Running water is one of the most significant aspects when it comes to working in the kitchen. Do not let gunk and dirt hamper the water flow. Using any of the cleaning methods will ensure that the faucet head is clean and running smoothly. So, do add this cleaning task to your to-do list every couple of weeks!