If you have well water and it’s turning brown, there are a few things you can do to try to clear it up. One is to check the pH level of your water and make sure it’s within the right range. If it’s not, you can add some baking soda to adjust the pH level. You can also try aerating your water by pouring it from one container to another a few times. If that doesn’t work, you can try using a filter or purifier to remove the sediment from your water.
In this article, we’ll discuss how to get rid of brown well water using each of these methods. Let’s get started!
What Causes Brown Well Water?
There are a few reasons why your well water might turn brown. One is that it could be due to natural causes, like minerals in the soil leaching into the water. It could also be a sign that there’s something wrong with your well, like sediment, Iron, Tannins, or rust buildup.
1. Iron and Manganese
If your water has a high level of Iron or Manganese, it can turn brown. These metals can be harmful to your health if you drink them in high concentrations, so it’s important to get rid of them if they’re present in your water.
You can reduce the levels of Iron and Manganese by using a filter or water purifier that’s specifically designed to remove these metals. There are also chemicals you can add to your water to reduce their levels, like IronOut or Manganese Sulfate.
2. Tannins
Tannins are natural organic compounds that can cause your water to turn brown. They’re present in many plants, fruits, and vegetables and can also be found in some water sources.
Tannins can be removed from your water by using a filter or purifier that’s specifically designed to remove them. You can also add a chemical to your water to reduce their levels, like Chlorine or Alum.
3. Sediment
Sediment is a natural part of well water and can cause it to turn brown. It’s the result of tiny pieces of rock and soil that have been ground down by the moving water.
Sediment can be removed from your water by using a filter or purifier that’s specifically designed to remove it. You can also try aerating your water by pouring it from one container to another a few times.
4. Rust
Rust is another common cause of brown well water. It’s the result of Iron that’s been combined with oxygen.
Rust can be removed from your water by using a filter or purifier that’s specifically designed to remove it. You can also try adding a chemical to your water to reduce their levels, like Chlorine or Alum.
In some cases, thorough maintenance and cleaning might resolve the problem, while in others, more extensive solutions like well pump replacement may be necessary to ensure the long-term health of your well system. When choosing a well pump replacement, assess the depth of your well and the water demand of your household or property. The pump’s horsepower and pumping capacity should match these requirements to ensure an adequate water supply.
Additionally, you should evaluate the type of pump that best suits your situation to maximize your investment. Submersible pumps are placed directly in the well and are more efficient for deeper wells. On the other hand, jet pumps are typically used in shallower wells and are installed above ground. If rust and sediment have been a recurring issue, you might want to consider a pump with built-in filtration systems or additional water treatment solutions to prevent future discoloration.
Consider energy efficiency and maintenance requirements when selecting a replacement well pump. Investing in an energy-efficient pump can save you money on electricity bills, and choosing a pump with minimal maintenance needs can reduce the hassle of upkeep. So, don’t hesitate to check the features and ask further questions from the equipment supplier.
How to Adjust the pH Level of Your Water
If your water’s pH level is too high or too low, it can cause your water to turn brown. You can adjust the pH level of your water by adding baking soda. Baking soda is a natural alkaline that will raise the pH level of your water if it’s too low and lower the pH level of your water if it’s too high.
How to Aerate Your Water
Aerating your water can help reduce the amount of sediment and Iron in your water. You can aerate your water by pouring it from one container to another a few times. This will help loosen up the sediment and allow it to flow more freely.
Water Test?
Before moving on to what types of filtration methods are available, you should get a water test. This will help you determine the cause of the brown water and what type of filter or purifier you need to remove. You can get a water test from your local water department or a private company.
What Types of Water Testing Are there?
There are a few different types of water testing kits available. The most common type is the in-home kit. This kit is typically used to test for bacteria and chemicals in your water. Another type of kit in the field kit. This kit is used to test for bacteria and viruses in water samples taken from a body of water like a river or lake. The last type of kit is the laboratory kit. This kit is used to test for a wide range of chemicals and pollutants in your water.
What Types Of Filtration Methods Could I use
There are many different types of filtration methods that you can use to get rid of brown well water. Some of the most common ones include:
- Granular Activated Carbon Filters
- Iron Filters
- Manganese Filters
- Sediment Filters
- Water Softeners
- UV Light
In Summary
Thanks for reading! We hope this article has been helpful. If you’re having trouble getting rid of the brown water in your well, be sure to get a water test and then try one of the methods We’ve listed. Good luck!