In the past few years, the increasing fuel price was a significant concern for the homeowners. They used formaldehyde to retrofit and insulate the homes. The formaldehyde was mostly used to fill the holes, cavities, and walls with liquid formaldehyde. When the liquid is injected, they expand and fill the areas. The use of this material later made the homeowners realize its health issues. They also noted that the amount of protection provided by these materials is incomplete. The materials used couldn’t fill the cavities evenly that it resulted in cold spots. However, the product is once again into the market, but the material used is spray foam insulation, which has rapidly gained popularity. Here are the reasons for its popularity:
Effective in Sealing Roofing and exterior
Spray foam insulation is considered useful in sealing roofs and other areas where condensation often accumulates too much moisture, leading to mold and weakening buildings’ structural integrity. Do you know that insulation creates a powerful bond to the roof, strengthening its resistance to wind and pressurization? Oshkosh spray foam insulation is useful when reducing sound by providing a barrier against road traffic and other loud noises. Hence, it plays a valuable role in protecting you from unwanted noises.
It Comes In Several Types
Product innovation has seen the introduction of several different types of spray foam insulation. In most residential construction, open-cell and closed-cell spray foam are used while high-density spray insulation is used as roofing foam in an industrial building. The open-cell sprayed-in foam insulation is typically used for interior applications. The open cell structure with low density foamed insulation enables moisture to permeate hence, helping in moisture management and bi-directional drying of the wall. Closed-cell spray insulation is a rigid medium-density material used in exterior applications and interior applications. This form of foam insulation has a greater R-value per inch, making it a good thing for areas that require the highest possible R-value to meet building requirements.
Provide Protection against Mildew and Mold
Most homes and commercial buildings insulated with spray foam are found to have better protection against mold. The polymer within the insulation is inert, making it not provide any food for mold or bacteria. Spray foam also provides a barrier from external moisture, preventing further mold from growing. In a building, it’s always assumed that walls are building a primary structural component; they need to withstand a particular amount of force like shaking during high winds. When spray foam insulation is inside the walls, it provides additional strength making the building supported more efficiently.
Ability to Fill Up All of the Cracks and Holes in Attics
The spray foam insulation usually expands, making it able to fill all cracks and holes in attics and crawl spaces. During cold or hot weather, you can use Spray foam insulation to create an airtight seal that’s less permeable to air infiltration when the air is coming in the house through small cracks and holes throughout a house and hence this result to the primary cause of energy loss. It also provides a moisture barrier, keeping water from seeping through cracks, holes, and crevices and damaging walls and floors. When your homes and commercial buildings are insulated with spray foam, owners stand a chance to save themself with a significant amount on energy costs, usually more than 50%, and other benefits, including increased structural integrity and mold reduction.
In summary, insulation is a fundamental energy efficiency measure that everybody should opt for. Old homes with no insulation can benefit from the addition of Oshkosh spray foam insulation. Existing homes with fiberglass that have settled are benefiting from the addition of spray foam insulation to get the thickness back up that they might require.